Zwift Ride Tablet Holder Installation guide

Five-part tablet holder for the Zwift Ride. Reuses the original Zwift Ride mounting hardware and tool.

Install
Bike mounted

View product

Zwift Ride Tablet Holder – StudioVelo3D

Before you start.

The five parts are supplied together as a complete assembly kit, not sold individually. Reuse the original Zwift Ride screws.

Check that all five supplied parts are present and undamaged: clamping screw (A), upper clamp (B), lower clamp (C), support tray (D) and mounting base (E). Keep the small mounting bracket, black wood screw, orange tool and four silver screws from your Zwift Ride; these are reused and are not included with this holder. Check the fit of your tablet, including its case, before installation.

[ WHAT IS IN THE BOX ]

  • 1 × clamping screw (A)
  • 1 × upper clamp (B)
  • 1 × lower clamp (C)
  • 1 × support tray (D)
  • 1 × mounting base (E)
  • Reuse the small mounting bracket, black wood screw, orange tool and four silver screws already supplied with your Zwift Ride. These are not included.

Follow the steps.

  1. [ 01 / 03 ]

    Choose the position

    PLACEHOLDER CONTENT. Pick a point on the Zwift Ride frame where the tablet sits in view without blocking the built-in screen.

    [ NOTE ]

    PLACEHOLDER. Add the confirmed frame position this holder is designed for.

  2. [ 02 / 03 ]

    Use the original mounting hardware

    Fit the mounting base using the original Zwift Ride mounting bracket and fasteners. Reuse the small bracket, black wood screw, four silver screws and orange tool; they are not supplied with the holder. Follow the original mounting arrangement and the product assembly illustration. Contact us before fitting if the arrangement is unclear.

  3. [ 03 / 03 ]

    Fit your tablet

    PLACEHOLDER CONTENT. Seat the tablet in the holder and check it stays put through a hard effort out of the saddle.

    [ WARNING ]

    PLACEHOLDER. Add the confirmed maximum tablet size and weight.

Final check.

Complete every check before using the product.

Using your product.

PLACEHOLDER CONTENT. Seat the tablet before you start riding, and take it out before you move the bike.

Care and adjustments.

PLACEHOLDER CONTENT. Wipe with a damp cloth. Sweat is corrosive, so clean it after hard sessions.

Questions about this product.

Do I need tools to fit it?

Yes. Reuse the orange tool and the original mounting bracket, black wood screw and four silver screws supplied with your Zwift Ride. These are not included with the tablet holder.

Which tablets fit?

PLACEHOLDER ANSWER. Confirm the maximum device size and weight the holder is designed for.

Will it stay put during a hard effort?

It is designed to hold the tablet steady through sprints and hard efforts, without rattling or needing repositioning mid-ride.

Need help?

Send a photo of your setup and tell us where you get stuck.

Contact StudioVelo3D