[ 01.1 ]
A bike against the wall
Scuffed paint, a marked wall and a bike that falls over when you walk past. The Wall Mount puts it where it belongs — off the floor.
[ SHOT — ROAD BIKE LEANING AGAINST A WALL · 4:3 ]
[ 00 ] Our story
Built layer by layer. In Rotterdam.
StudioVelo3D makes functional cycling hardware — designed, printed and checked in one Rotterdam studio. This is how a product gets from a problem at home to a part on your wall.
[ SHOT — PRINT HEAD CLOSE-UP, MID-PRINT · 4:3 ]
[ 01 ] The problem
Every product starts with a problem.
We do not start with a product idea. We start with the small things that get in the way of riding, training and storing your gear at home.
Before
After
[ 01.2 ]
A trainer that fights you
A fixed trainer locks your body in place. Rocker Feet add natural side-to-side movement, the way a bike moves on the road.
[ SHOT — TRAINER ON ITS STANDARD FEET · 4:3 ]
[ 01.3 ]
Gear everywhere
Helmet on a chair, glasses on the desk, shoes by the door. The Bar & Rack system gives every piece a fixed place on the wall.
[ SHOT — HELMET AND GLASSES ON A CHAIR · 4:3 ]
[ 02 ] From sketch to object
Most versions never leave the studio.
Every design goes through a series of versions. We print, test, break and adjust until it works — then it goes in the shop.
-
[ SHOT — HAND SKETCH OF THE WALL MOUNT · 4:5 ]
[ V.00 ]
Sketch
A problem, a tape measure and a pencil. The first idea is rough on purpose.
-
[ SHOT — SCREENSHOT OF THE 3D MODEL · 4:5 ]
[ V.01 ]
3D model
Dimensions, fixings and load are worked out on screen before anything is printed.
-
[ SHOT — FIRST PROTOTYPE ON THE DESK · 4:5 ]
[ V.02 ]
First print
The first physical version. It fits — but it is not good enough yet.
-
[ SHOT — PROTOTYPE UNDER LOAD OR BROKEN · 4:5 ]
[ V.03 ]
Test until it fails
We load, twist and drop prototypes until they break. Then we fix the weak point.
-
[ V.04 ]
Final
Only a version that passes every test goes into the shop.
[ 03 ] The studio
One studio. Every part printed here.
No factory abroad and no warehouse. Every order is printed in Rotterdam, checked by hand and packed at the same table.
[ SHOT — ROW OF PRINTERS RUNNING ]
[ SHOT — PACKING AN ORDER ]
[ SHOT — PRINT HEAD CLOSE-UP ]
[ SHOT — PARTS ON THE PRINT BED ]
[ SHOT — HANDS CHECKING A PART ]
[ SHOT — ROTTERDAM STREET OR SKYLINE ]
-
48h
From order to dispatch
-
0units
Waiting in a warehouse — everything is made on demand
-
100%
Printed in our own Rotterdam studio
[ 04 ] Order to door
From order to door in 48 hours.
Nothing waits in a warehouse. Your order starts the moment you place it.
[ SHOT — PACKED ORDER, READY TO SHIP · 4:3 ]
-
T+00:00
Order placed
Your order goes straight into the print queue. Nothing is taken off a shelf.
-
T+01:00
Printing
Your parts are printed in the studio — layer by layer, sustainably made.
-
T+30:00
Final check
Every part is checked by hand. If it does not meet our standard, it does not leave the studio.
-
T+48:00
Shipped
Packed carefully and sent from Rotterdam with track & trace.
[ SHOT — PORTRAIT IN THE STUDIO · 4:5 ]
[ 05 ] Behind the studio
Good hardware should be invisible. You should not think about your mount, your Rocker Feet or your gear storage — they should just work.
Jesse — StudioVelo3D, Rotterdam
[ END OF PRINT ]
Your setup, next.
Find the part that solves your problem — or build your own setup.
[ 06 ] Build log
Stay in the loop.
New components, production notes and early access from the Rotterdam studio.
[ 01 ]New components.
[ 02 ]Production notes.
[ 03 ]Early access.