Rack 400 — B

Name: Rack 400 — B
Brand: StudioVelo3D
SKU: SET-SRACK-B
Price: 44.95 EUR
Availability: InStock

€44,95 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

Once the ride is done, the kit can go back on the wall. Rack 400 — B is a pre-made combination from our modular storage range, made to order in Rotterdam. It brings lacquered oak together with printed components and uses the same system you can configure yourself in the builder.

Facts and features

Vertical 400 mm × Ø25 mm Rack set*
2 × glasses holder; 2 × storage tray
Central rod-side connector supplied pre-fitted
Lacquered oak and custom-developed bioplastic
Made to order in Rotterdam

* For solid, non-hollow walls only. Wall installation and accessory fitting are required. See What's in the box and the installation guide.

[ 01 ] Returns

You can request a return within 14 days of delivery. See our refund policy for the conditions and return instructions.

[ 02 ] Shipping

Dispatched within 48 hours of ordering. Carrier delivery time is additional.

Netherlands: €8.95, or free shipping on orders of €100 or more; estimated delivery 1–2 business days after dispatch.

Belgium: €12.95, with estimated delivery in 3–5 business days.
Germany: €12.95, with estimated delivery in 3–5 business days.
EU: (Austria, Czech Republic, Denmark, France, Hungary, Ireland, Italy, Latvia, Luxembourg, Poland, Portugal, Slovakia, Spain and Sweden) €24.95, with estimated delivery in 3–5 business days. All estimates start after dispatch.

Other destinations: €44.95 to the countries available at checkout, with estimated delivery in 5–8 business days. For other destinations, contact us for a quote. Import duties and local taxes may apply outside the EU. See our shipping policy for full details. The applicable shipping charge is shown at checkout.

[ 03 ] Material

3D-printed in a custom-developed bioplastic. Combined with lacquered oak rods with finished ends and stainless-steel mounting screws.

[ 04 ] Made on demand

We 3D print orders in our Rotterdam studio after you order. Your selected product or configuration is made for your setup.

[ 05 ] Compatibility

Vertical Rack set with a 400 mm × Ø25 mm rod. Accessories slide onto the rod. The rod-side connector is pre-fitted at its centre.

For solid, non-hollow walls only. Do not install on hollow walls or plasterboard partitions. Use fixings suitable for the wall material.

[ 06 ] What's in the box

1 × lacquered oak rod, 400 mm × Ø25 mm, with the rod-side connector pre-fitted at the centre
1 × separate wall-side part of the two-part mounting connection
2 × stainless-steel 5 × 40 mm mounting screws
2 × 8 × 40 mm wall plugs
2 × glasses holder
2 × storage tray

No screw caps or washers are included. Mount the wall-side part yourself, then fit the rod assembly and slide the supplied accessories on from a free rod end. Tools are not included: drill, suitable drill bit, spirit level, pencil and screwdriver.

View full details